HOW TO FIT A SIGNATURE MAGNETIC KNIFE RACK AND CLIP
Fitting your Signature Magnetic Knife Rack and clip is show in this simple, eay-to follow video. There are also a few Do's and Don'ts for looking after your knife rack.
How to fit your Signature Magnetic Knife Rack
1 - Decide where you want the rack on the wall.
2 - Use a spirit level to ensure that the rack is perfectly horizontal.
3 - Use the rack as a template to accuratly mark the holes.
4 - Carefully drillexactly in the centre of the holes that you have jst marked.
5 - Insert the suppled wall plugs or plugs appropriate for your wall.
6 - Pass the screws through the threaded washers.
7 - Screw tightly into the wall.
8 - Screw on the decorative screw caps to finish the installation.
9 - Place knives onto the rack.
10 - Removable knife sharpener clipcan be located anywhere on the rack.
How to fit your Signature Magnetic Knife Rack
1 - Decide where you want the rack on the wall.
2 - Use a spirit level to ensure that the rack is perfectly horizontal.
3 - Use the rack as a template to accuratly mark the holes.
4 - Carefully drillexactly in the centre of the holes that you have jst marked.
5 - Insert the suppled wall plugs or plugs appropriate for your wall.
6 - Pass the screws through the threaded washers.
7 - Screw tightly into the wall.
8 - Screw on the decorative screw caps to finish the installation.
9 - Place knives onto the rack.
10 - Removable knife sharpener clipcan be located anywhere on the rack.
Our tips for looking after your Signature Magnetic Knife Rack
1 - Wipe with a clean and dry microfibre cloth.
2 - Ensure all knives are thoroughly dry before inserting onto knife rack.
3 - Stainless steel components can be cleaned by using a dry microfibre cloth (dampen for more stubborn marks) and dry immediately after cleaning. To remove persistent marks, clean with a branded non-abrasive stainless steel cream using a soft cloth.
How to fit your Signature Magnetic Knife Rack
1 - Decide where you want the rack on the wall.
2 - Use a spirit level to ensure that the rack is perfectly horizontal.
3 - Use the rack as a template to accuratly mark the holes.
4 - Carefully drillexactly in the centre of the holes that you have jst marked.
5 - Insert the suppled wall plugs or plugs appropriate for your wall.
6 - Pass the screws through the threaded washers.
7 - Screw tightly into the wall.
8 - Screw on the decorative screw caps to finish the installation.
9 - Place knives onto the rack.
10 - Removable knife sharpener clipcan be located anywhere on the rack.
SHOP PRODUCTS:
Sold out
Sold out
Sold out